A software update via USB- Stick is most simple.

All you need is an USB- Stick and the correct software for your receiver.

The software is downloadable at www.nanoxx.info

• Download the software, unpack it on your USB- Stick and connect the Stick with your NanoXX receiver.

• After that open the receiver- menu and switch to Multimedia -> USB.
  

• There you'll find all update files stored on the USB- Stick.

• Now choose the correct update- file and press the red button (or OK- button depending on the actual Software Version) on your remote to start the update.

• Please wait till the update- process is finished. The receiver’ll reboot automatically.

Do not disconnect the receiver from power while firmware update is in progress

It’s recommend to run a factory reset after completed update process.

(menu –> factory settings -> factory reset) All settings will be lost!

Only satellite tuner version:

If necessary load the default program list (menu -> factory settings -> factory reset)

In the default program list are all stations of the satellite Astra 19 ° east and Hotbird 13 ° east pre-sorted included!