The NanoXX sends out all TV and audio signals in parallel.

You can have a flat- TV connected via HDMI to the TV signal and, in parallel, a Dolby amplifier via the optical or the coaxial digital audio output, or via the analog RCA connectors connected. The settings are located in menu -> system settings -> sound settings.

The Dolby signal can also be transferred via HDMI (menu -> audio settings: HDMI Dolby Digital). In this way the audio and video signal is send trough the HDMI- output of your NanoXX directly to your flat- TV or looped trough your HDMI-ready Digital AV- Receiver to the flat- TV. In the second way the AV- receiver’ll play out the digital audio by HDMI as source.

Parallel to the HDMI transmission also the analogue audio and video signal is served via scart output. The video signal via scart (always in 576i) is independent of the HDMI resolution.

Our tip: Connect high-quality flat panels or projectors only via HDMI or YPbPr because the image quality is much better than, for example, the scart connector.